TimeTools atomic digital wall clock time displays utilise NTP over ethernet to display a continuously accurate synchronised time.
The synchronised time displays are available as four inch high numerals with four or six digits. The large wall clock obtains time from an intranet or internet based NTP server, to provide an accurate time display to one-fifth of a second.
The Ethernet NTP digital wall clock operates with any of NTP or SNTP time resource including TimeTools NTP server products. The unit can also utilise internet based time sources, such as NIST.
For simplicity of operation, the units are Power-over-Ethernet (PoE) devices (IEEE 802.af) using the same network components as IP telephones. If required single or multi-port PoE injectors can be provided at a very reasonable cost.
The large digital wall clock plug into a ethernet jack on your local area network. No mains socket is required, the device is powered from the network jack plug. Installation is therefore very straightforward, and its easy to move the units around.
The devices are powered over the standard CAT5 cabling using power-over-ethernet (IEEE 802.af), the same ethernet standard as voice-over-ip telephones. If your network is not PoE enabled, single or multi-port midspan converters (power injectors) are available at very low-costs.
The digital wall clocks are highly accurate, requiring no human intervention. All time updates are performed automatically using SNTP over the network. No special hardware or software is required. The devices can automatically detect available NTP time servers on the network.
Additionally, you can configure and control hundreds os clocks from any PC on your network using a simple telnet session.
- Four or six digit displays to show hour, minutes or hours, minutes, seconds.
- 4" high display digits
- Flexible power options using IEEE 802.af PoE .
- Low-cost single or multi-port PoE injectors available.
- RJ45 10/100 networking.
- Static display, no flicker, ideal for CCTV use.
- Twelve or twenty four hour format
- Easy to install and maintain.
- Accurate, traceable, time information displayed throughout organization.
- Easy installation and configuration.
- Maintenance free operation.
- Ideal for trading rooms, time & attendance and access control, anywhere an accurate time display is required.
Networked NTP Digital Wall Clock Specification (4-digit)
||Red 4 digits, 7 segments HH:MM
||Power-over-Ethernet PoE Fully compliant with IEEE 802.af
||101.6 mm (4 in)
||> 50m (150 ft)
|Dimensions W x H x D:
||300 x 150 x 560 mm (12.0 x 6.0 x 2.2 in)
||0.9 Kg (2 lbs)
||200 milliseconds typical
||-30C ~ +85C
||DHCP or Static IP addressing.
||10/100 BaseT RJ45
||NTP, SNTP, Telnet
||Configurable for time-zone and daylight saving
Networked NTP Digital Wall Clock Specification (6-digit) As Above Except:
||Red 6 digits, 7 segments HH:MM:SS
|Dimensions W x H x D:
||420 x 150 x 560 mm (16.75 x 6.0 x 2.2 in)
||1.1 Kg (2.3 lbs)
|Surface wall-mounting via keyholes.
||Single or double cantilever mounting.
||Single or double pendant mounting.
4 Digit Molded Plastic - Black
4 Digit Aluminium - Black
6 Digit Aluminium - Black
Pendant\Cantilever Mounting Kit
Digital wall clock freeware
Clock Digital - NTP synchronised LED time displays
Large Digital Clock LED time display
Digital clocks synchronised to servers
Large digital time clock display
LED Digital Wall Clocks using NTP
Ethernet digital wall clock timing displays
Ethernet Wall Clock
Inova digital wall clock
LED digital wall clock
Networked digital wall clock time displays
NTP synchronised digital wall clock
POE powered digital wall clock
Power-over-ethernet digital wall clock
Radio controlled wall clock systems
Synchronised wall clock displays