TimeTools is an official distributor of Inova OnTime™ Digital Wall Clocks and message boards. Inova digital wall clocks plug into a network jack on your ethernet LAN to synchronise time with a NTP or SNTP time server. No AC outlet is required since the devices utilise power-over-ethernet, PoE, technology. This means that installation costs are low, and Inova wall clocks can be easily moved around without the expense of providing a mains outlet.
Power is supplied to the digital wall clocks over standard CAT-5 cable in an identical manner to IP telephones. The devices utilise IEEE 802.3AF power over ethernet standard.
Fig: Inova OnTime™ Digital Wall Clock
Inova Digital Wall clocks display a continuously accurate time by periodically synchronising time over the ethernet network to a NTP or SNTP time server. Additionally, you can configure and control all the clocks on the network from a single PC without the addition of any software.
Inova Models available:
Inova ONT4
Inova ONT4BK-P
Inova ONT4OW-P
Inova ONT4BK
Inova ONT4PT
Inova ONT4OW
Inova ONT4SS
Inova ONT4FI
Inova ONT6BK
Inova ONT6PT
Inova ONT6OW
Inova ONT6SS
Inova ONT6FI
Additional References:
Digital wall clock time displays
Digital wall clock freeware
Clock Digital - NTP synchronised LED time displays
Large Digital Clock LED time display
Digital clocks synchronised to servers
Large digital time clock display
LED Digital Wall Clocks using NTP
Ethernet digital wall clock timing displays
Ethernet Wall Clock
Inova digital wall clock
LED digital wall clock
Networked digital wall clock time displays
NTP synchronised digital wall clock
POE powered digital wall clock
Power-over-ethernet digital wall clock
Radio controlled wall clock systems
Synchronised wall clock displays
|
