 |
Tel: +44 (0) 1902 897400
Fax: +44 (0) 870 123 1844 Email: Info@TimeTools.co.uk |
Do I need a GPS Amplifier ?
A GPS amplifier may be required for longer cable runs from the GPS receiver to the GPS antenna. The GPS antenna sits in-line on the coax cable and boosts the signal from the GPS antenna to extend the cable run to the receiver. The amplifier is powered from the GPS receiver and requires no additional power source. TimeTools GPS amplifier provides an extra 20dB of gain. This allows cable runs of over 100m with low-loss coax cable. Still longer cable runs can be accommodated by installing multiple amplifiers. |
Support - GPS Timing
- What is the coverage of the GPS signal ?
- Where is the best place to locate the GPS antenna ?
- That are the advantages of the GPS timing solutions ?
- What is the maximum cable length of the GPS antenna ?
- GPS signal issues.
- What is Galileo ?
- NTP Time Server GPS Amplifier
- Windows 2000 GPS Clock
- Windows XP GPS Clock
- Windows 2003 GPS Clock
- Linux GPS Clock
- NMEA GPS Clock
- Sharing a single GPS antenna with multiple GPS NTP Server
Support - MSF \ DCF-77 Radio Time Code Timing
- MSF Timing Advantages.
- DCF-77 Timing Advantages.
- What is the coverage of the MSF signal ?
- What is the coverage of the DCF-77 signal ?
- Where is the best place to locate a MSF radio antenna ?
- Where is the best place to locate a DCF-77 radio antenna ?
- What is the maximum cable length of the MSF radio antenna ?
- What is the maximum cable length of the DCF-77 radio antenna ?
- MSF Radio Signal Issues.
- MSF Signal Outages
- NTP Time Server MSF Accuracy
- NTP Time Server DCF77 Accuracy
- NTP Time Server GPS Accuracy
- NTP Time Server - Is the MSF Signal Affected By Weather
Support - NTP - Network Time Protocol
- NTP Authentication Example
- Linux NTP Client Configuration
- Windows 2000 NTP Time Server
- Windows 2003 NTP Time Server
- Windows XP NTP Time Server
- NTP Time Server Accuracy
- NTP and SNTP
- Using NTP \ SNTP Software with Windows XP / 2003 Firewall
Support - NTP s5000 Series NTP Time Servers
- What is the maximum NTP s5000 NTP requests per second ?
- What are SysLog messages ?
- Dual NTP Time Server
- NTP Time Server BTU
Support - MSF Radio FAQ
Support - Atomic Clock FAQ
- MSF Atomic Clock information
- DCF Atomic Clock information
- GPS Atomic Clock information
- Atomic Clock UTC Time
- TimeTools Atomic Clock Synchronisation Devices
Support - Digital Wall Clock
- How do the Ethernet Digital Wall Clocks display accurate time ?
- How are the Digital Wall Clocks configured ?
- How is PoE used on the Digital Wall Clocks ?
- Digital Wall Clock Mounting options.
- Digital wall clock display formats.
- Digital Wall clock time zones
- Daylight saving
Support - Windows XP / Server 2003
Support - Revision
- Index
- NTP s5000 Firmware Revisions
- NTP s5100 Firmware Revisions
- NTP s5500 Firmware Revisions
- TrustTime NT/2000/XP
- TrustTime NTP
|
Ethernet Networked NTP Time Displays |
|
Email: UK |
|
Environment |
All TimeTools products conform to EU Directive 2002/95 which restricts of the use of certain hazardous substances in electrical and electronic equipment. |
More Information |
Product Information |
Popular Categories |
NTP Server |
UK Sales: |
01902 897400 | International Sales: |
+44 1902 897400 |   |
Copyright © 2002-2012 TimeTools. All Rights Reserved. All Trademarks Acknowledged. |
||||